The Sanwa KP1 is a pocket-size Voltage Tester with an accuracy of 0.7% and electric field detection capabilities.
The KP-1?is a voltage tester of the RMS value response type equipped with the electric field detection facility. It is designed for measurements in the ranges specified by IEC 61010-1 CAT. IV 600 V and CAT. III 1000 V. It uses the Δ-Σ method operation and uses the True RMS detection method for AC voltages. The device has a single button operation mode and can automatically detect AC and DC voltages.
The KP1 has a 9999-count display with a backlight that changes color from green to orange depending on the voltage. The device can also perform continuity tests and features a buzzer alarm that can be used for both continuity and electric field detection. This device can detect an electric field of about 60 Volts or more with a detection frequency of 50/60 Hz, which is perfect for power lines. The bar graph and intermittent buzzer beeps change in 5 steps according to the field intensity.
The red probe on this device is fixed on a rotatable arm while the black probe lead is connected via a cable and can move freely. The red probe can also be used as an antenna for detecting electric field strength.
Includes meter, instruction manual and?one set of test leads?and probes.
- Pocket size CAT.IV.600V
- 9999 count display with backlight
- 7% Best accuracy
- Single button system (Preventing operation mistakes)
- AC/DC auto-identifying voltage measurement
- AC measurement in true RMS value
- EF (Electric Field) detection
- The backlight color changes at 20V or more (When a voltage of 20V or more is input, the backlight color changes from green to orange)
- Self-test (Checking failures of the LCD or disconnection of a lead wire)
- CF (Crest Factor)
